Glue and Grout

Pre-mixed cementitious adhesive with compensated shrinkage and controlled drying with high workability characteristics, extended open time and increased adhesion and good ability to absorb deformations of the substrate, zero vertical slippage, inelastic with excellent characteristics of recordability, excellent resistance to moisture, aging , to acids and alkalis. Ideal for laying floors and walls with dimensions exceeding 60x60 cm and also on non-absorbent and smooth surfaces, natural stones and overlapping non-absorbent materials, specific for overlapping large sizes (over 30x30 cm) and on substrates also non-absorbent and smooth, to be applied directly on any internal and external surface as long as it is stable: old and new lime and cement based plasters, bastard mortars, premixed or traditional cementitious screeds, smoothed concrete floors, weathered concrete, old supports in tiles and natural stones, heating floors, two-component and one-component cementitious waterproofing "INTOIDRO ELS" and "INTOIDRO MONO". Specific for laying any floor and wall covering such as: ceramics, terracotta, natural stone, stoneware, etc. Specific for bonding floors on screeds with floor heating insertion, specific for façade applications and for industrial and commercial flooring as well as for civil applications, for bonding insulating materials (polyurethane, EPS, xps, rock wool or glass, cork) , bonding of floors subjected to high stresses and heavy traffic, gluing of tiles in pools and tanks, gluing of low-thickness porcelain stoneware.

AVAILABILITY:

INTOCOL SS FLEX B S2: White color

INTOCOL SS FLEX G S2: Color: Grey

PACKAGING:25 kg sacks - 70 bags sacks - 17.50 ql

USE:Indoor / Outdoor

GRANULOMETRY:≤ 0.6 mm

SURRENDER:2/5 kg / sqm

DEFORMABILITY: > 5mm - S2

CLASSIFICATION UNI EN 12004:CLASS C2 TE S2 / DOP nr.303

Pre-mixed cementitious adhesive with compensated shrinkage and controlled drying with high workability characteristics, prolonged open time and increased adhesion and good capacity to absorb deformation of the support, zero vertical slipping, Frost resistant with excellent characteristics of registrability, excellent resistance to moisture, ageing, acids and alkalis. Ideal for the laying of floors and coverings with dimensions greater than 60x60 cm and on supports also non-absorbent and smooth, natural stones and overlapping of non-absorbent materials, specific for overlapping large sizes (greater than 30x30 cm). Supports also inabsorbent and smooth surfaces. to be applied directly on any internal and external surface as long as it is stable as: lime and cement base plasters old and new, cement mortars, premised or traditional cementitious screed, concrete floors Smoothed, seasoned concrete, old tile and natural stone supports, heating floors, bicomponent cementitious waterproofing and monocomponent "Intoidro ELS" and "Intoidro MONO". Specifically for the laying of any floor and upholstery such as: ceramics, terracotta, natural stone, gres, etc. specific for gluing floors on screed with floor heating, specifically for façade applications and for Industrial and commercial paving as well as civil, for bonding of insulating materials (polyurethane. Eps, XPS, rock or glass wool, cork), gluing of floors subjected to heavy stresses and intense traffic, bonding of tiles in swimming pools and bathtubs.

Availability:

Intocol SS FLEX B S1: white color

Intocol SS FLEX G S1: Grey colour

Package: 25 kg sacks-70 sacks-17.50 QL footboards

Usage: Indoor/outdoor

Particle size: ≤ 0.6 mm

Yield: 2/5 kg/sqm

Deformability: > 2.5 mm < 5 mm-S1

Classification UNI EN 12004: Class C2 TE S1/PDO Nr. 148

Premixed adhesive based on grey or white cement, of class C2 TE, with good deformability, prolonged open time, increased adhesion, zero vertical sliding, compensated shrinkage and controlled drying with high machinability characteristics. with excellent registrability, excellent resistance to moisture, ageing, acids and alkalis. Ideal for the laying of floors and coverings with dimensions greater than 60x60 cm and on supports also non-absorbent and smooth, natural stones and overlapping of non-absorbent materials, specific for overlapping of large formats (dimensions greater than 30x30 cm) and on supports, also inabsorbent and smooth, to be applied directly on any internal and external surface, provided that it is stable as: cement plasters lime and concrete, old and new, cement mortars, premix or traditional cementitious screed, floors in Smoothed concrete, seasoned concrete, old tiles in tile and natural stone, heating floors. Specified for the laying of any floor and upholstery such as: ceramics, terracotta, natural stone, gres, etc. specific for gluing floors on screed with underfloor heating.

Availability:

Intocol SSB FLEX: White color

Intocol SSG FLEX: Grey color

Package: 25 kg sacks-70 sacks-17.50 QL footboards

Usage: Indoor/outdoor

Particle size: ≤ 0.6 mm

Yield: 2/5 kg/sqm

Deformability: Good

Classification UNI EN 12004: Class C2 TE

Premixed adhesive based on grey or white cement, of class C2 TE, with good deformability, prolonged open time, increased adhesion, zero vertical sliding, compensated shrinkage and controlled drying with high machinability characteristics. with excellent registrability, excellent resistance to moisture, ageing, acids and alkalis. Ideal for the laying of floors and coverings with dimensions greater than 60x60 cm and on supports also non-absorbent and smooth, natural stones and overlapping of non-absorbent materials, specific for overlapping of large formats (dimensions greater than 30x30 cm) and on supports, also inabsorbent and smooth, to be applied directly on any internal and external surface, provided that it is stable as: cement plasters lime and concrete, old and new, cement mortars, premix or traditional cementitious screed, floors in Smoothed concrete, seasoned concrete, old tiles in tile and natural stone, heating floors. Specified for the laying of any floor and upholstery such as: ceramics, terracotta, natural stone, gres, etc. specific for gluing floors on screed with underfloor heating.

Availability:

Intocol SSB FLEX: White color

Intocol SSG FLEX: Grey color

Package: 25 kg sacks-70 sacks-17.50 QL footboards

Usage: Indoor/outdoor

Particle size: ≤ 0.6 mm

Yield: 2/5 kg/sqm

Deformability: Good

Classification UNI EN 12004: Class C2 TE

Premixed adhesive based on gray or white cement, class C2 TE, with discrete deformability, prolonged open time, increased adhesion, no vertical slip, compensated shrinkage and controlled drying, with high workability characteristics, non-sticking, with excellent characteristics of registrability , excellent resistance to moisture, aging, acids and alkalis. Ideal for laying floors and walls that are not very absorbent and with dimensions up to 60x60 cm and also on supports that are not very absorbent and smooth and natural stones to be applied directly on any internal and external surface as long as it is stable: old and new cement based plasters, mortars bastarde, premixed or traditional cementitious screeds, smooth concrete floors, weathered concrete, old tile and natural stone floors, heated floors. Specific for laying any floor and wall covering such as: ceramics, terracotta, natural stone, stoneware, etc. Suitable for overlay bonding on old tile floors with maximum size 30x30 cm. Specific for gluing floors on screeds with floor heating insertion.

AVAILABILITY

INTOCOL B / B: white color
INTOCOL B / G: gray color
PACKAGING:25 kg sacks - 70 bags sacks - 17.50 ql
USE:Indoor / Outdoor
GRANULOMETRY:≤ 0.6 mm
YIELD:2/5 kg / sqm
DEFORMABILITY:Disceta
CLASSIFICATION UNI EN 12004:CLASS C2 TE

Premixed adhesive based on gray or white cement, class C1 TE, with extended open time, with no vertical slip, with compensated shrinkage and controlled drying, with high workability characteristics, with excellent characteristics of registrability, excellent resistance to humidity, aging, acids and alkalis. Ideal for laying medium to absorbent floors and walls with a maximum size of 30x30 cm and on absorbent and not particularly smooth surfaces, to be applied directly on any internal and external surface as long as it is stable: lime and cement based plaster, old and new, bastard mortar, premixed or traditional cementitious screeds. Specific for laying ceramic and terracotta floors and walls and generally absorbing floors and walls.

AVAILABILITY
INTOCOL A / B PLUS: white color
INTOCOL A / G PLUS: gray color
PACKAGING:25 kg sacks - 70 bags sacks - 17.50 ql
USE:Indoor / Outdoor
GRANULOMETRY:≤ 0.6 mm
YIELD:2/5 kg / sqm
CLASSIFICATION UNI EN 12004:CLASS C1 TE

Premixed adhesive based on gray or white cement, C1TE class, with shrinkage
plywood and controlled drying, with high workability characteristics,
frost-free, with excellent characteristics of recordability, excellent resistance to moisture,
aging, acids and alkalis. Ideal for laying medium-absorbent floors and walls with dimensions up to 30x30 cm and on absorbent and not particularly smooth surfaces, to be applied directly on any internal and external surface as long as it is stable: lime and cement based plaster, old and new, bastard mortar , premixed or traditional cementitious screeds. Specific for laying ceramic and terracotta floors and walls and generally absorbing floors and walls.

AVAILABILITY
INTOCOL A / B: white color
INTOCOL A / G: gray color
PACKAGING:25 kg sacks - 70 bags sacks - 17.50 ql
USE:Indoor / Outdoor
GRANULOMETRY:≤ 0.6 mm
YIELD:2/5 kg / sqm
CLASSIFICATION UNI EN 12004:CLASS C1TE