Heat-Reflective Siloxanes
Heat-Reflective Siloxanes
SILTHERM PRIMER
Preparation base with special Siloxanic emulsions with high penetrating power anchoring and reconsolidating in the preparation of the base for the reflective IR siloxane line on internal and external surfaces. The small size of the binder particles give the product excellent penetration capacity in the substrate, allowing the reduction of water absorption and thus standardising the absorption of the treated supports, giving more than Excellent waterproofness characteristics, however, leaving the breathability of the surfaces unchanged.
Color:
colorless, white and color folder
Packaging:
5 -10-20 LT tank
Usage:
Indoor/outdoor
Dilution:
1 part of product and 2 parts of clean water
Yield:
8-10 sqm/lt per hand of diluted product, according to the absorption of the support
SILTHERM PITTURA
Siloxane water-based coating reflecting thermal insulation with special siloxane resins and hollow glass beads, of superior quality, very high coverage, safe inalterability to atmospheric agents and ultraviolet rays. It has characteristics of high breathability and at the same time characteristics of water repellency. For the insulation, decoration and internal and external protection of both new and old surfaces such as civil plaster based on lime and cement, lime-based plasters, dehumidifiers plasters, waterproof plasters, mineral finishes, coat plasters premided, concrete, old coatings and synthetic paints.
Color:
white and Color folder
Package:
Trunk 4-14 LT
Usage:
Indoor/outdoor
Dilution:
From 15% to 25% by weight with clean water • Roller ready to use
Yield:
1.8/2.8 sqm/LT dry thickness 300/400 Micron
Recommended application thickness:
300/400 micron Dry
Overhead Rate. by Assorb. "W24" capillary water:
= 0.07 kg/(MQ * 24 h ½)
Vapour diffusion resistance m equivalent "Sd":
= 0.12 m
Kuenzle theory "W * Sd":
< 0.01 kg/(MQ * 24 h ½)
SILTHERM RIVESTIMENTO
Mineral coating Acril-siloxane, in paste, IR reflecting and thermal insulation. based on special elastic acril-siloxane resins and hollow glass beads, for the insulation, protection and interior and exterior decoration of surfaces both new and old, plasters made from lime and cement, lime-based plasters, dehumidifier plasters, water-repellent plasters, mineral finishes, coat systems and plasters with premided coats, concrete, old coatings and synthetic paints. Thanks to the nature of the raw materials used, it guarantees a safe water repellent and a good breathability of the walls, anti-carbonating effect and excellent resistance to the weather and to alkanes.
Color:
white and Color folder
Package:
15 Kg Barrel
Usage:
Indoor/outdoor
Dilution:
Ready to use
Particle size:
Type F: MM 1.0 • Type M: mm 1.2 • Type G: mm 1.5 • SG Type: MM 2.0
Yield:
Type F: 1, 2-1, 5 kg/MQ • Type M: 1, 3-1, 6 kg/MQ • Type G: 1.8-2.1 kg/sqm • SG Type:
2.2-2.6 kg/sqm
Overhead Rate. by Assorb. "W24" capillary water:
= 0.1/0.5 kg/(MQ * 24 h ½)
Vapour diffusion resistance m equivalent "Sd":
= 0.14 m
Kuenzle theory "W * Sd":
< 0.07 kg/(MQ * 24 h ½)
SILTHERM ELS
Mineral water-based elastomeric siloxane anti-algae reflecting and thermo-insulating hydropaint made from special siloxane resins and hollow glass beads for the insulation, decoration and protection of internal and external surfaces. For the protection of concrete and masonry even in aggressive outdoor environments. Specified to solve microcavillature is in a preventative and resolutive way in case the phenomenon has already occurred. of superior quality, very high coverage, non-reactive atmospheric agents and ultraviolet rays, has characteristics of high breathability and at the same time characteristics of water repellency. Specified for the insulation, decoration and exterior protection of both new and old surfaces such as civil cement-based plasters, lime base, dehumidifier plasters, water repellent plasters, mineral finishes, premixed coat and plasters, concrete, old coatings, synthetic paints, plaster-trimmed walls, concrete, wood and non-ferrous substrates.
Color:
white and Color folder
Package:
Trunk 4-14 LT
Usage:
Indoor/outdoor
Particle size:
≤ 50 Micron
Dilution:
from 15 to 25% by weight with clean water • Roller ready to use
Yield:
2.4/3.2 sqm/lt dry thickness 300/400 Micron
Recommended application thickness:
300/400 micron Dry
Elongation at break UNI 8490/17:
to 7 days 100%
Overhead Rate. Steam Transmission "V":
67 G/MQ 24h
Vapour diffusion resistance m equivalent "Sd":
= 0.314 m
Overhead Rate. by Assorb. "W24" Capillary Water:
< 0.04 kg/(MQ * 24 h ½)
Kuenzle theory "W * Sd":
< 0.01 kg/(MQ * 24 h ½)
SILTHERM ELS PLUS
Anti-algae siloxanic elastomeric mineral water-based paint with reflective IR thickness and
Thermal insulation. based on special siloxanic resins and hollow glass beads, for the insulation, decoration and protection of internal and external surfaces. For the protection of concrete and masonry even in aggressive outdoor environments. Specified to solve microcavillature is in a preventative and resolutive way in case the phenomenon has already occurred. of superior quality, very high coverage, non-reactive atmospheric agents and ultraviolet rays, has characteristics of high breathability and at the same time characteristics of water repellency. Specified for the insulation, decoration and exterior protection of both new and old surfaces such as civil cement-based plasters, lime base, dehumidifier plasters, water repellent plasters, mineral finishes, premixed coat and plasters, concrete, old coatings, synthetic paints, plaster-trimmed walls, concrete, wood and non-ferrous substrates.
Color:
white and Color folder
Package:
Trunk 4-14 LT
Usage:
Indoor/outdoor
Particle size:
≤ 200 Micron
Dilution:
from 15 to 25% by weight with clean water • Roller ready to use
Yield:
2.4/3.2 sqm/lt dry thickness 300/400 Micron
Recommended application thickness:
300/400 micron Dry
Elongation at break UNI 8490/17:
to 7 days 100%
Overhead Rate. Steam Transmission "V":
67 G/MQ 24h
Vapour diffusion resistance m equivalent "Sd":
0.314 m
Overhead Rate. by Assorb. "W24" Capillary Water:
< 0.04 kg/(MQ * 24 h ½)
Kuenzle theory "W * Sd":
< 0.01 kg/(MQ * 24 h ½)
MALVIN | SNC, Strada Statale 7 Bis - 81030 Gricignano Di Aversa (CE) - Italia | VAT Reg No 02612581211 | Tel. +39 081 5029713 - Tel. +39 081 8132780 | Fax. +39 081 5029748 |
amministrazione@malvinsrl.com |
Legal
Information |
Privacy Policy and Cookie Policy
Designed by 
|
Questa azienda è presente anche su 
e 
|
Questa azienda è presente anche su
e