Siloxanes

AGROPOLI PRIMER

Preparation base with special Siloxanic emulsions with high penetrating power. anchoring and reconsolidating in the preparation of the Siloxanic line, on internal and external surfaces. The small size of the binder particles give the product excellent penetration capacity in the substrate, allowing the reduction of water absorption and thus standardising the absorption of the treated supports. It has excellent water-resistance characteristics, however, leaving the surface breathability unchanged. Approved by Ytong Laboratories.

Color: Colorless and folder colors

Packaging: Tanica 5-10-20 LT

Usage: Indoor/outdoor

Dilution: 1 part of product and 2 parts of clean water

Yield: 8-10 sqm/lt by hand, diluted product according to the absorption of the support

Certification: Approved by Ytong-Test Report PB-VK-170-01

AGROPOLI PITTURA

Siloxanic Mineral Water-based paint for the decoration and internal and external protection of both new and old surfaces such as lime and concrete base plasters, lime base plasters, dehumidifiers plasters, water-repellent plasters, mineral finishes, plasters premixed coat, concrete, old coatings and synthetic paints. Very high coverage, safe non-reactivity to atmospheric agents and ultraviolet rays. It has characteristics of high breathability and at the same time characteristics of water repellency. Approved by Ytong Laboratories.

Color: white and Color folder

Package: Trunk 4-14 LT

Usage: Indoor/outdoor

Dilution: from 40 to 55% by volume with clean water • Roller ready to use

Yield: 12/14 sqm/lt per hand

Overhead Rate. by Assorb. "W24" Capillary water: < 0.07 kg/(MQ * 24 h ½)

Vapour diffusion resistance m equivalent "Sd": = 0.12 m

Kuenzle theory "W * Sd": < 0.01 kg/(MQ * 24 h ½)

Certification: Approved by Ytong-Test Report PB-VK-170-01

AGROPOLI RIVESTIMENTO

COLOR: White or color chart.

PACKAGING: Kg 5 and kg 25 Plastic containers.

Usage: Indoor/outdoor

DILUIZIONE: Pronto all'uso

Grading: Type F mm 1,0 • Type M mm 1,2 • Type G mm 1,5 • Type SG mm 2,0

YIELD Type F 1,5-2,0 kg/mq. thickness about 1,0 mm Type M 1,8-2,3 kg/mq. thickness about 1,2mm circa. Type G 2,0-2,5 kg/mq thickness about 1,5mm. Type SG 2,5-3,0 kg/mq thickness about 2,0mm.

Water absorption coef. due to capillary action “W24” < 0,10 kg/(mq*24 h½)

Water vapor dif. resistance factor m equivalent “Sd”: = 0,13 m

Kuenzle Theory (W * Sd): <0,013 kg/(mq*24 h½)

CERTIFICATION: Approved by laboratories YTONG -Test Report PB-VK-170-01