Impermeability Agents
Impermeability Agents
INTOIDRO ELS
Two-component fiber-reinforced cementitious sheath based on cement binders and special elastic polymer binders. anti-aggressive and resistant to abrasion. for mineral waterproofing in general of pools, terraces, balconies, showers, bathrooms, walls against the ground and solving problems caused by the negative and positive thrust of water and the containment of drinking water, as protection of plasters and concretes to water penetration and attack by aggressive atmospheric elements, such as anti-carbonation for concrete structures, as elastic shaving of prefabricated structures subject to small deformations, overlapping existing floors. To be used, where necessary, in combination with MALVIN BAND and MALVIN TEX or MALVIN NET.
PACKAGING:
25 kg sacks - 35 bags sacks - 8.75 ql • 7.5 lt tanks - 35 tank cans - 2,625 ql
USE:
internal / external
COLOR:
Component A (powder) Gray • Component B (liquid) White
GRANULOMETRY:
≤ 0.5 mm
YIELD:
1.6 kg / mq thickness 1 mm
CAPILLARY WATER ABSORPTION:
Waterproof
INTOIDRO ELS PLUS
Two-component fiber-reinforced cementitious sheath based on cement binders and special elastic polymer binders. anti-aggressive and resistant to abrasion. for mineral waterproofing in general of pools, terraces, balconies, showers, bathrooms, walls against the ground and solving problems caused by the negative and positive thrust of water and the containment of drinking water, as protection of plasters and concretes to water penetration and attack by aggressive atmospheric elements, such as anti-carbonation for concrete structures, as elastic shaving of prefabricated structures subject to small deformations, overlapping existing floors. To be used, where necessary, in combination with MALVIN BAND and MALVIN TEX or MALVIN NET.
Packaging:25 kg sacks-35 bags-8.75 QL • Cans from 7.5 lt-Footboards from 35 cans-2.625 QL
Usage:Indoor/outdoor
Colour:Component A (powder) Grey • Component B (liquid) White
Particle size:≤ 0.5 mm
Yield:1.6 kg/sqm thickness 1 mm
Capillary Water absorption:waterproof
Elastic Cement Sheath
Product complying with the European standard
INTOIDRO ELS P
Two-component elastic cementitious sheath based on cememntizi binders and special elastic polymers, anti-aggressive and resistant to abrasion, used for the mineral waterproofing in general of pools, terraces, balconies, showers, bathrooms, walls against the ground and the resolution of the problems caused by the negative and positive thrust of water and the containment of drinking water, such as protection of plasters and concretes to water penetration and attack by aggressive atmospheric elements, such as anti-carbonation for concrete structures, as elastic protection of prefabricated structures with small deformations, overlapping existing floors. To be used, where necessary, in combination with MALVIN BAND and MALVIN TEX or MALVIN NET.
PACKAGING:
25 kg bags - 35 bags sacks - 8.75 ql • 10 lt tanks - 35 tanks cans - 3.50 ql
USE:
internal / external
COLOR:
Component A (powder) Gray • Component B (liquid) White
GRANULOMETRY:
≤ 0.2 mm
YIELD:
Application by brush or roller 1,6 kg / mq thickness 1 mm
Spray application 2.2 kg / sqm per coat
CAPILLARY WATER ABSORPTION:
Waterproof
INTOIDRO MONO
Cement-based elastic monocomponent mortar made from cementitious binders and special acrylic polymers highly elastic, anti-aggressive and resistant to abrasion, for mineral waterproofing in general of swimming pools, terraces, balconies, Showers, baths, walls against the ground as anti-carbonating for concrete structures, as elastic shaving of prefabricated structures subject to small deformation, overlapping to existing floors. To be used, where it is necessary, in combination with Malvin BAND and Malvin TEX or Malvin NET.
Package:
20 kg sacks-70 sacks-14.00 QL Footboards
Usage:
Indoor/outdoor
Color:
Grey
Particle size:
≤ 0.5 mm
Yield:
1.1 kg/MQ thickness 1 mm
Capillary Water absorption:
waterproof
MALVIN TEX
Microperforated reinforcement technology, suitable for two-component cementitious waterproofing and monocomponents, of polymeric and bituminous waterproofing, of cementitious and cement-based smoothing and self-leveling, of cementitious adhesives on bottoms Acrylic elastic sheaths and elastomeric hydropaints. It increases the performance of elasticity, compactness and resistance to punching, elongation to breakage and the value of crack bridging. The technology behind this reinforcement fabric guarantees elastic and tenacious armatures incorporated in the low-thickness waterproofing systems, in the connection shims and in the poses with cementitious adhesives. Its structure with Hightech fabrics, guarantees bidirectional elasticity, mass incorporation and level positioning according to the facilitated installation in every application situation. The physical and chemical resistances of the product confer a superior durability even under harsh environmental conditions. The reinforcement fabric produces reinforcement with superior elasticity and control of the dimensional stability guaranteed by the use of polypropylene microfibres with high resistance to the alkaline environment. The ease and the speed of laying makes easy the use of the reinforcement fabric in the restoration interventions of surfaces to renew, avoiding the risk of formation of micro-lesions on Levellers, shavings, waterproofing.
Packaging:
Rolls of 50 ml of 1000 mm wide
Color:
White
Total Thickness:
0.33 mm
Fabric Weight:
60 g/m²
Physical properties According to DIN 527-3:
Longitudinal breaking load 240 N/50 mm
Lateral breaking load 45 N/50 mm
Longitudinal extension before breaking 30%
Lateral extension before breaking 120%
MALVIN BAND
Rubberized tape waterproof to water and steam with felt in TNT of polypropylene resistant to alkali, acids and salts solutions. Highly elastic and deformable even at low temperatures. Weatherproof, specific for bicomponent waterproofing systems and cementitious monocomponents. Specific for waterproofing of corners between adjoining walls and between floors and walls to be treated with Intoidro els/Els Plus/ELS P/MONO, Elastic waterproofing of expansion joints of balconies, terraces etc. and walls to be treated with Intoidro els/Els Plus /els P/MONO, sealing, The crossing of pipes and drains, showers, kitchens and baths, elastic sealing of expansion joints of prefabricated panels to be treated with Intoidro els/Els PLUS/Els P/MONO.
Availability
Malvin BAND rubberized linear tape; Rolls of 10 ml
Malvin BAND 90 ° internal preformed angle; 25-piece Boxes
Malvin BAND 270 ° external preformed corner; 25-piece Boxes
Size
Malvin BAND H 120 mm (cm 2.5 TNT + cm 7 rubberized fabric + cm 2.5 TNT)
Malvin BAND 90 ° rubberized Fabric L 12 + 12 cm • H 9 + 9 cm
Malvin BAND 270 ° rubberized Fabric L 12 + 12 cm • H 9 + 6 cm
Technical data in accordance with DIN 527-3
Maximum burst pressure: 1.1 bar;
Longitudinal breaking load: 153 N/15 mm
Lateral breaking load: 35 N/15 mm
Lengthening to longitudinal rupture: 31%
Elongation at side break: 503%
UV Resistance: 500 h
Chemical properties
3% Hydrochloric acid: resistant
Sulphuric acid 35%: resistant
Citric acid 100gr/lt: resistant
5% Lactic acid: Resistant
3%/20% potassium hydroxide: resistant
Sodium Iplocrorito 0.3 g/L: Resistant
Saline water (20 g/L seawater): resistant
INTOIDRO MONO S/P
Pre-mixed one-component mortar anti-aggressive osmotic water repellent resistant to salts, based on special hydraulic binders, ideal for mineral waterproofing and regularisation of concrete substrates and cement plasters, provided they are stable and non-oozing, masonry walls in perforated, brickfull or mixed, in concrete blocks. Particularly suitable for waterproofing in thrust and counter thrust of underground rooms, cellars, elevator pits, boxes, foundation slabs; waterproofing of structures designed to contain drinking or aggressive water such as: swimming pools, tanks, pipes, tanks, etc.
PACKAGING:
25 kg sacks - 70 bags sacks - 17.50 ql
USE:
Indoor / Outdoor
COLOR:
Grey
AVAILABILITY:
type P: brush use • type S: thickness use
THICKNESS:
type P: from 1 to 2 mm • Type S: from 5 to 20 mm
GRANULOMETRY:
P type: ≤ 0.6 mm • S type: ≤ 1.3 mm
YIELD:
type P:1 kg / mq thickness 1 mm • type S: 15 kg / mq thickness 10 mm
APPLICATION:
type P: brush • type S: trowel / machine
RESISTANCE TO COUNTER:
type P: thickness 1 mm / 2 Bar - thickness 2 mm / 5 Bar • type S: thickness 5 mm / 3 Bar - thickness 10 mm / 5 Bar
INTOIDRO MONO IN
Mortar produced according to ancient traditional recipes based on natural lime, Portland and pozzolanic cement and volcanic sand. The addition of Pozzolanic lagants confers to the product natural hydroleakage properties, without the use of any additive or hydrophobic resin. Tested by A.R.I.N. S.P.A. for the waterproofing of drinking water reservoirs. To be used for the waterproofing and containment of drinking water.
Package:
25 kg sacks-70 sacks-17.50 QL footboards
Usage:
Indoor/outdoor
Color:
Grey
Particle size:
≤ 1.5 mm
Yield:
15/16 kg/mq per cm of thickness
Thermal conductivity EN 1745:
λ10, dry, mat = 0.47 W/MK
Capillary water absorption EN 1015-18:
Class "W2"
Permeability coefficient K (certificate A.R.I.N. S.P.A.):
1, 59x10
Certification:
A.R.I.N. S. P. A
FINISH THERM
Thermo-Insulating external elastomeric insulating liquid sheath for outdoors. for waterproofing, protection and decoration in general, based on special elastic acrylic styrene resins and hollow glass beads. Specified for the restoration and maintenance of old bituminous sheaths, protection and waterproofing of roofing in fibre cement and sheet metal, waterproofing on tiles and Marmette, waterproofing in general of inclined surfaces (not Treadable) protection and decoration of bituminous coverings and waterproofing coatings with a bitumen-polymer base, finishes of metallic structures with protective bituminous background, of rough or plastered masonry, prefabricated works in general, etc.
Thanks to the special composition, which gives the product high solar reflectance (the ability to reflect solar radiation) and high thermal emissivity (the ability to emit heat in the infrared wavelength), it is Specific to reflect solar radiation by reducing the heat absorbed by the surfaces on which it is applied by bringing an advantage of durability, reducing the mechanical stresses deriving from thermal day/night transfer. an advantage in Terms of comfort and energy efficiency, reducing the heating of indoor spaces (especially those in direct contact with the outer casing) thus obtaining an improvement of internal conditions and a significant saving of Energy spent on cooling during the summer season. The high thermal emissivity contributes further to the energy efficiency, further reducing the energy spent for the cooling, thanks to the ability to return to the external environment during the night hours most Energy absorbed during daylight hours, passively cooling the interiors.
It contributes in addition to the reduction of the "island of heat" effect in the urban environment. The capacity to reduce the temperatures of the roofs and the diffused light increases the efficiency of the photovoltaic panels. The summer benefits make the winter penalties negligible, since the intensity and duration of the solar radiation during the winter are considerably reduced compared to the summer ones.
Color:
white, red, green, gray and folder colors
Packaging:
4-14 Lt drums
Usage:
Indoor/outdoor
Dilution:
from 5 to 20% by weight with clean water • Roller ready to use
Yield:
2, 5/2.8 sqm/LT dry thickness 300 micron
Recommended minimum Thickness:
300 micron dry
Elongation at break UNI 8490/17:100%
Flexibility at-10 ° C:
Flexible
FINISH GUM
Liquid elastomeric sheath in aqueous dispersion based on special acrylic styrene resins. elastic for waterproofing of terraces prior to laying of tiles, restoration and maintenance of old bituminous sheaths, protection and Waterproofing of roofing in sheet metal fibre cement, tile and tiles, waterproofing in general for non-pedestrian inclined surfaces, protection and decoration of bituminous coverings and waterproofing coatings based on bitumen-polymer base, Finishes of metallic structures with protective bituminous background, of rough or plastered masonry, pre-works in general, etc.
Color:
red-green-gray-white-folder colors
Package:
Trunk 4-14 LT
Usage:
Indoor/outdoor
Dilution:
from 5 to 20% by weight with water; Roller ready to use
Yield:
3/5 sqm/LT finished
Flexibility at-10 ° C:
Flexible
Elongation at break UNI 8490/17:200%
BLACK KOTE
Waterproofing bituminous paste for universal use, resistant to UV rays and water stagnation. It looks like a thixotropic, impalpable dark-coloured paste, diluted in water. It dries quickly forming an elastic and glossy film with the characteristic of presenting high impermeability even in presence of strong stagnation of water. To be used as waterproofing for walls and roofs, for vapour barriers in thermal insulation, for protective painting of masonry to be interrare, for the waterproofing of tanks and reservoirs not intended to contain drinkable water. It can be used for the anti-humidity coating of external walls. It is miscible in all proportions with water, sand and cement.
Color:
Black
Package:
Trunk 5-10-18 Kg
Usage:
Indoor/outdoor
Dilution:
With brush application, roll and spatula dilute to 20% with clean water • With spray application dilute to 30% with clean water
Yield:
Depending on the surfaces to be treated
Drying time:
Apparent complete 4 hours
EXTRA LARGE
Elastomeric liquid sheath consisting of an elastomer bituminous emulsion with special macromolecules that make the dried product highly waterproof and particularly elastic. To be used as waterproofing for both horizontal and vertical cementitious surfaces on sight or against Earth, to restore deteriorated bituminous waterproofing, gutters and galvanized sheets. It is suitable for gluing vertically and horizontally any insulating panel on breathable, cementitious and wooden surfaces. It resists water stagnation and UV rays. Repair old waterproof mantles. Adheres to all types of materials. Replaces the bituminous sheaths in rolls. It resists low and high temperatures.
Color:
Black
Package:
Trunk 1.5-5-10-18 Kg
Usage:
Indoor/outdoor
Dilution:
With brush, roller and brush application dilute to 20% with clean water • With spray application dilute to 30% with clean water
Yield:
Depending on the porosity and regularity of the surface to be treated. Ca. 1 Kg/sqm per layer
Drying time:
Apparent complete 24 hours
FREEWAY
Water-resistant, non-slip liquid sheath with rubber granules, with elastic coating function for terraces, canopies and roofs in general. The product is particularly suitable for cement coating, chimney-pots, corrugated sheets, fences, terraces, roofs, coverings in general. For the waterproofing of extended surfaces with stagnant water, we recommend to use the Extralarge liquid bituminous water sheath as waterproofing product. In The latter case the FREEWAY product can be used as a water coating. In The latter case the FREEWAY product can be used as a pedestrian coating on the product EXTRA LARGE dried.
Color:
White-black-red-green-grey
Packaging:
10-20 Kg Plastic Drums
Usage:
Indoor/outdoor
Dilution:
Ready to use
Yield:
1.5/2 Kg/MQ per mm thickness
Drying time:
Apparent complete 4 days
PRIMA MANO ECO
Bitumen based adhesion promoter in aqueous emulsion for bituminous waterproofing materials such as prefabricated sheaths, bituminous liquid sheaths and hot bitumen with excellent adhesion on all types of surfaces.
COLOR:
dark brown
PACKAGING:
18 lt plastic drums
USE:
Indoor / Outdoor
DILUTION:
Ready to use
YIELD:
Consumption depends on the porosity and regularity of the surface to be treated. Normally it varies from: 200-300 g / m² for cement surfaces • 150-200 g / m² for wood surfaces • 150-200 g / m² for double-layered metal surfaces
DRYING TIMES:
Full apparent 2 hours and 30 minutes
POOL GUM
Topcoat formulated with chlorinated rubber and unsaponifiable plasticizers. Thanks to its chemical and
corrosion resistance it is suitable for substrates exposed to strong humidity and wet structures or
structures soaked in water (both fresh and salt) especially those exposed to the action of sea water.
COLOR: landini light blue (for swimming pools)
PACKAGING: 23 kg plastic drums
BUILDING : swimming pools , concrete structures, cement.
Dilution
- by spraying =
40-50% with synthetic thinner
- by brushing = 10-20% with synthetic thinner
- by roller = 20-30% with synthetic thinner
RECOMMENDED FILM THCICKNESS :
70-100 dry microns
MALVIN EDILPOT
Bituminous waterproofing membrane of a plastomer type, made by coupling a waterproofing mass based on distilled bitumen modified with polyolefinic polymers and a fibreglass reinforced polyester nonwoven reinforcement, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the thickness or the areic mass. The membrane is of the non-self-protected type, has the upper surface coated with amorphic anti-adhesive sand, on request it can be produced with other anti-adhesive elements: talc, Polyolefin thermofuse film, etc. and the bottom surface coated with Polyolefinic film Thermofuse in adherence.
Thickness:
3-4mm
Roll Size:
10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing to prevent
Rising moisture from the ground
Water resistance:
100kpa
Cold Flexibility:-5 C °
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415
Packaging and Storage: The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
MALVIN EDILPOT MINERAL
Bituminous waterproofing membrane of a plastomer type, made by coupling a waterproofing mass based on distilled bitumen modified with polyolefinic polymers and a fibreglass reinforced polyester nonwoven reinforcement, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the areic mass. The membrane is of the self-protected type, has the top surface coated with flakes of natural or coloured ceramized slate, with the exception of a side band free from self-protection and covered by a thermofuse polyolefinic film, to facilitate The surmount welds and the lower surface coated with polyolefinic film thermofuse in adherence.
Thickness:
3-4mm
Roll Size:
10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing to prevent
Rising moisture from the ground
• Flexible bituminous membranes for waterproofing, Underlayer for Roofing
Discontinuous
Water resistance:
100kpa
Cold flexibility:-10 C °
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415; EN13859-1-1211-51-14-0016
Packaging and Storage: The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
MALVIN EDILFLEX
Bituminous waterproofing membrane of a plastomer type, made by coupling a waterproofing mass based on distilled bitumen modified with polyolefinic polymers and a fibreglass reinforced polyester nonwoven reinforcement, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the thickness. The membrane is of the non-self-protected type, it has the upper surface covered with anti-adhesive amorphic sand, on request it can be produced with other anti-adhesive elements: talc, polyolefin thermofuse film or polypropylene nonwoven (on one or both surfaces), etc. and the bottom surface coated with polyolefinic film thermofuse in adherence.
Thickness:
3-4mm
Roll Size:
10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing to prevent
Rising moisture from the ground
Water resistance:
100kpa
Cold flexibility:-10 C °
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415
Packaging and Storage:
The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
MALVIN EDILFLEX MINERAL
Bituminous waterproofing membrane of a plastomer type, made by coupling a waterproofing mass based on distilled bitumen modified with polyolefinic polymers and a fibreglass reinforced polyester nonwoven reinforcement, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the areic mass. The membrane is of the self-protected type, has the top surface coated with flakes of natural or coloured ceramized slate, with the exception of a side band free from self-protection and covered by a thermofuse polyolefinic film, to facilitate The surmount welds and the inferior surface coated with polyolefinic film thermofuse in adherence.
Thickness:
3-4mm
Roll Size:
10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing to prevent
Rising moisture from the ground
• Flexible bituminous membranes for waterproofing, Underlayer for Roofing
Discontinuous
Water resistance:
100kpa
Cold flexibility:-10 C °
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415; EN13859-1-1211-51-14-0016
Packaging and Storage:
The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
MALVIN NOVA ISOROOF PLUS S
Bituminous waterproofing membrane of an elastoplastomeric type. It is produced industrially by coupling a waterproofing mass, based on distilled bitumen modified with a combination of thermoplastic elastomers and polyolefinic polymers, and an armature in polyester nonwoven from continuous wire, reinforced with Elements of glass, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the areic mass. The membrane is of the non-self-protected type, has the upper face coated with amorphic anti-adhesive sand, on request it can be produced with other anti-adhesive elements: talc, Polyolefin thermofuse film, etc., and the lower face coated with film Polyolefinic Thermofuse, in adherence.
Thickness:
3-4mm
Roll Size:
7.5-10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing to prevent
Rising moisture from the ground
Water resistance:
100kpa
Cold Flexibility:-20
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415
Packaging and Storage: The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
MALVIN NOVA ISOROOF PLUS S MINERAL
Bituminous waterproofing membrane of an elastoplastomeric type. It is produced in dustrially by coupling a waterproofing mass, based on distilled bitumen modified with a combination of thermoplastic elastomers and polyolefinic polymers, and a continuous wire polyester nonwoven armature, reinforced with Elements of glass, which gives high dimensional stability. The forming of the sheet is hot, through the impregnation of the armature with the waterproofing mass in the fluid state and subsequent calendaring to define the areic mass. The membrane is self-protected, has a top face coated with flakes of natural or coloured ceramic slate, except for a side band free from self-protection and covered by a thermofuse polyolefinic film, to facilitate the Surmount welds, and the lower face coated with Polyolefinic Thermofuse film, in adherence.
Thickness:
4mm
Roll Size:
7.5-10x1m
Intended use:
• Flexible bituminous membranes for the waterproofing of roofs
• Flexible bituminous membranes for waterproofing, Underlayer for Roofing
Discontinuous
Water resistance:
100kpa
Cold flexibility:
-20 C °
Standards and Certifications:
EN13707; EN13969-1381-1381-CPR-415
Packaging and Storage:
The product is packaged in rolls and packed on pallets wrapped in shrink film, normally it must be held upright, without overlapping the pallets, to avoid irreversible deformation that can compromise The correct positioning. It should be stored in suitable environments, protected from heat sources and frost.
PU MEMBRANE 450
PU MEMBRANE 450 is a one component, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.
PACKAGING : 25 Kg metal can.
COLOR: White and Grey
Density (ASTM D1875)
1,35 ± 0,03 gr/ml
Surface Curing (ASTM C679) 8-12 hrs (23°C and %50 R.H.)
Viscosity
5500±1000 cps
Ready for foot traffic* (ASTM C679) 24-36 hrs (23°C and %50 R.H.)
Full Cure 7 days (23°C and %50 R.H.)
IYEC:
1,8 Kg/mq
MALVIN | SNC, Strada Statale 7 Bis - 81030 Gricignano Di Aversa (CE) - Italia | VAT Reg No 02612581211 | Tel. +39 081 5029713 - Tel. +39 081 8132780 | Fax. +39 081 5029748 |
amministrazione@malvinsrl.com |
Legal
Information |
Privacy Policy and Cookie Policy
Designed by 
|
Questa azienda è presente anche su 
e 
|
Questa azienda è presente anche su
e